dB Technologies VIO S218

2x18" vc 4", 3000 W/RMS

Product code: dBTech-VIO S218

The perfect partner for VIO L212 in larger sound reinforcement applications. A simple, effective dual sub configuration designed to enhance the reproduction of the lowest frequencies, boosted by an advanced DSP control and complete network capability.

Featuring a dual 18" subwoofer pairing in a voluminous bass-reflex housing, VIO S218 encompasses a vigorous audio performance and a ultra low frequency punch, extending down to 28 Hz: the perfect bottom-end addition to large VIO L212 sound reinforcement systems.

As a default, VIO S218 is equipped with dBTechnologies RD-Net card, for real time remote control via Aurora Net software.
Furthermore, the preamplifier is ready for future upgrades with Audinate DanteTM AoIP protocol. To help users in this configuration, S218 comes with built-in technologies: Near Field Communication (NFC™) proximity sensors are used to determine the position of each box within an array. This technology, together with a hi-brightness LED bulb on the front of the enclosure, contributes to help the user to recognize, identify and match each box physical position on the remote control software Aurora Net.
The amp also allows users to run auto-test on electronics and transducers before and after use and a real time impedance control. This unique system ensure tour-grade reliability and remote control over your entire PA’s health.

A cardioid stack preset button automatically process the sound of the backward sub in gradient inverted stack configurations, in order to reach maximum cancellation of the rear side.
The on-board delay module allows VIO S218 to reach a max 9.9ms delay with 0.1 ms steps.

TECHNICAL
SPECIFICATIONS

TECHNICAL DATA
Speaker Type : Active Bassreflex subwoofer
ACOUSTICAL DATA
Frequency Response [- 10 dB] 27 Hz (HPF)
Frequency Response [- 6 dB] 28 Hz to cut frequency (Xover dependent)
Max SPL 143 dB
LF 2x18” Neodymium Voice Coil LF 4”
Directivity Omnidirectional
AMPLIFIER
Amplifier 3200 W RMS [2x 1600 W RMS Class-D Digipro® G4] 
Cooling Passive convection, internal fan
Power Supply Full-range SMPS with PFC (100V~-240V~, 50-60Hz)
PROCESSOR
Controller DSP 32 bit
AD/DA Converter 24 bit/96 kHz
Limiter Peak, RMS, Thermal
Delay Option 0 - 9.9 ms internal | steps of 0.1 ms [on-board
Crossover Frequency LF-HF
Selectable 60-110 Hz + Full Range (8 steps) LF-Xover out slope 24 dB/Octave
INPUT
Signal Input
1 x XLR balanced, 1 x RJ45 Link (RDNet)
Signal Output
1x XLR balanced, 1 x RJ45 Link (RDNet)
Power Socket
1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls
1x Input Attenuation Rotary Encoder
2x Delay Rotary Encoder (0-9.9 ms)
1x Polarity Inversion Switch (0° or 180°)
1x Cardioid mode Switch
1x X-Over Frequency Rotary Encoder (8 steps)
Special Features
NFCTM and Frontal LED Identification System
380V Resistant SMPS
IPOS Intelligent Power-On Sequence
Opto-isolated floating pre-amp
System Test (transducers diagnostics)
MECHANICS
Housing Multiplex plywood - Polyurea painting
Handles 4x Side. Aluminium
Raincover Included
Rigging Points
2x Pick Points on top for DRK-210 rigging frame
Width 1300 mm (51.18 in)
Height 520 mm (20.47 in)
Depth 800 mm (31.5 in)
Weight 85.6 kg (188.72 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

 

Quantity
dBTech-VIO S218
dBTech-VIO S218
dBTech-VIO S218
dBTech-VIO S218
dBTech-VIO S218
dBTech-VIO S218